11
Note the Colour Temperature setting is only available on the Bender models, and the range will
be dependant on the particular model of Bender.
NORMAL
Normal is for using the light as a normal solid light source. Intensity and Colour Temperature
(Bender models only) may be adjusted. The ON/OFF button can be used to turn the light on or
off, and the FLASH button can be used to create flashes
SETTING
RANGE
DESCRIPTION
BRIGHTNESS
0-100%
Light output level
COLOUR TEMP
2700-6500K
Approximate colour temperature
DUAL LEVEL
Dual level allows two light levels to be set, one that is switched to when the FLASH button is
pressed. Useful if you need a modeling light level, but then want to flash brighter for a lighten-
ing or strobe effect. Use the ON/OFF button to turn on or off the modeling light, and FLASH
button to flash up to the Flash Level setting.
SETTING
RANGE
DESCRIPTION
BRIGHTNESS
0-100%
Modeling light output level
FLASH LEVEL
0-100%
Light output when FLASH button pressed
COLOUR TEMP
2700-6500K
Approximate colour temperature
STROBE
Used for strobe effects. The ON/OFF button can be used to turn the effect on or off, and the
FLASH button can be used to create ‘bursts’ of strobe
SETTING
RANGE
DESCRIPTION
BRIGHTNESS
0-100%
Strobe brightness level
FREQUENCY
1-50Hz
Frequency of strobe effect
DUTY CYCLE
1-99%
Duty cycle of strobe effect - the ratio between
light OFF and ON times
COLOUR TEMP
2700-6500K
Approximate colour temperature
