14 LaserMatrix Floor Model Stacker
NOTE: The 25-pin connector on the printer is the
serial interface connector. If your 16 page per
minute LaserMatrix printer uses the serial port for
data input, you must connect a serial adapter
between the computer and stacker cables and the
25-pin connector on the printer. If you require a
serial adapter (Part No. LM1000A121), contact
Output Technology by voice or fax. See the phone
numbers at the front of this publication. Or make
your own from the wiring diagram below.
Serial Adapter Wiring Diagram
LB0-P3
Summary of Contents for LaserMatrix Floor Model Stacker
Page 15: ...LaserMatrix Floor Model Stacker 13 LB0 H1...
Page 32: ......
