17
Operation
Depress igniter button until you hear it sparking. You will hear a
3.
small popping noise. Keep igniter button pushed in while slowly
turning the fuel flow valve to the full flow position at the fire pit.
The fire pit should light within 5 seconds. If you do not hear the ig-
niter sparking you may need to replace the battery. The starter uses
one standard AAA battery, located directly behind the rubber push
button knob. (Unscrew knob to access battery.) Note some models
ship with the batteries removed or may not be included with your
model.
If a flame does not start within 10 seconds, shut off all gas supply
4.
and wait five minutes to allow all gas fumes to clear. Re-try or go to
trouble-shooting and start again from step 1.
Turning Off Gas
Turn the ON/OFF valve to the off position at the unit for natural gas unit.
For propane units, turn the ON/OFF valve to the OFF position at the unit
and then turn the valve on the propane tank to the OFF position clock-
wise.
NOTE
The propane regulator in this appliance is equipped with a low flow pro-
tection device. Unless the propane cylinder valve is opened before the
valve, the gas flow will be reduced resulting in a very small flame.
To reset this device, shut off the valve, disconnect the hose from the
cylinder to relieve the pressure, then close the propane cylinder valve.