15
Operation
Operating the Fire Pit
WARNING: DO NOT use solid fuel, such as wood or charcoal, in gas
fueled fire pits.
Upon completing the gas line connection, a small amount of air will be
in the lines. When the first lighting the burner, it will take a few seconds
for the lines to purge themselves of this air.
Once the purging is
complete, the burner
will light and operate as
indicated in the instruc-
tion manual. Subsequent
lighting of the appliance
will not require purging
unless the gas supply
has been disconnected.
Inspect the burner be-
fore each use of the ap-
pliance. If there is any evi-
dence that the burner is damaged, it must replaced before operating.
Upon completing the gas line connection, a small amount of air will be
in the lines. When first lighting the burner, it will take a few minutes for
the lines to purge themselves of this air. Subsequent lighting of the ap-
pliance will not require such purging.
Never allow the ON / OFF valve to remain in the open position without
placing a burning match on top of the burner FIRST!
You must have clear and easy access to the ON / OFF valve AFTER the
appliance is installed and connected to the gas supply in order to safely
turn of the burner.
Make sure the burner is in place prior to using the appliance. If the
burner is damaged, install a replacement burner as specified by the
manufacturer.
