Installation
24
900-0123-01-00 Rev
A
Figure
18
Mounting the GSLC (continued)
Bottom Screws
Keyhole Slots
7.
Re-hang the GSLC using the keyhole mounts.
8.
Secure to the mounting surface using all four mounting feet holes.
9.
Using the bolts provided on the Radian inverter’s battery terminals, connect the terminals
to the GSLC’s inverter bus bars. Tighten to the value shown in Table 2 on page 17. For
more information on the Radian terminals, see the
Radian Series Inverter/Charger
Installation Manual.
)
10. Leave the door and interior cover removed until all components have been installed and
all wiring is complete.
...continued from the previous page.
Keyhole Slots
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
