- 26 -
Please press the
button. Then, select your session duration, select your
session resistance, and choose your program type. At this point, you will be shown the
GameCube controller screen that allows you to send the correct controls to start your
game. Please refer to the Users Manual for the game you are playing on how to play
the game.
Resetting the GameCycle
Always turn OFF and turn ON the GameCycle by pressing the power switch at the
bottom back of the GameCycle. This turns everything OFF and ensures that all sub-
systems start up correctly in the right sequence.
However, for certain tests or in the event that a reset is required for the GameCycle
software only, you may be able to do so by pressing the button labeled
. You may be required to enter the password for your GameCycle.
Please follow the instructions described previously for navigating that screen.