Oursson KM1010HSD Instruction Manual Download Page 11

Page: 11 / 21

THE BASICS

Press “+” to raise and “-” to lower the
temperature. These buttons can set the

temperature from 37 °С up to 100 °С.

After selecting the temperature, press
button, to start cooking, the

symbol will

be flashing in the right corner of the display,
until the chosen temperature is reached.
The temperature may be changed in the
process. All you need to do is to press

button and change the temperature by pressing
“

”and “

” buttons. After which press the

button to confirm selected value.

SETTING THE COOKING TIME

In standby mode, press

button, the display

will light up the corresponding symbol, and
minute indicator will be blinking.
Press “

” to raise or “

” to lower the cooking

time. Press the button briefly, to change the time
gradually.

For a fast change press and hold the
corresponding button. Press

button again

to change from minutes to seconds setting,
after which the seconds indicator will blink,
which can be changed by pressing “

” and

“

” buttons.

While cooking, a countdown will be shown on
the display. When the cooking is finished, you
will hear a sound signal and see “

End

” on the

display.

Maximum cooking time is 60 minutes.

You can’t change the cooking time after
pressing

button.

You can’t change the cooking time after
pressing

button.

If you need to stop the cooking process
before the cooking time ends, press start
button.
If you didn’t set the cooking time, but started
the cooking process, it will automatically end
in 15 minutes.
When the cooking is finished, you will hear a
sound signal and see “

End

” on the display.

“HEAT” MODE

To turn on “

HEAT

” mode, in standby press

button.

NOTE!

In the “HEAT” mode, the mixer

cup is heating. Do not touch it with bare
hands.

There 10 speed levels available when
cooking.

Change to higher speed levels gradually to
avoid spattering of food.

If you want to change the speed level in the
cooking process, press

button and

choose the required speed with “+” or “-”
buttons. Then confirm your selection with

button.

“STIRRING” MODE

To select “

STIRRING

” mode press

, button

and choose the required speed with “+” or “-”
buttons from 1 to 3. The corresponding symbol
will be flashing on the display.

“MIXER/BLENDER” MODE

To select “

MIXER/BLENDER

” MODE press

, button and choose the required speed

with “+” or “-” buttons from 4 to 10. The

corresponding symbol will be flashing on the
display.
Depending on the speed level, the chopping
may be rough, small and very thin, you
can mix ingredients and prepare mash.
The higher the speed in this mode, the
thinner chopping of the ingredients may be
received.

When chopping solid ingredients (meat,
ice) it is necessary for the device to cool.
After every 30 seconds of work, you need
to make a brake for 30 seconds. When
chopping meat in “MIXER/BLENDER”
mode, maximum length of work must be
15 minutes. Maximum amount of meat that
can be chopped at a time – 200 g.

COMBINATION OF TWO MODES

“HEAT” AND “STIRRING /MIXER/

BLENDER”

Combination of those modes allows cooking
at any temperature, stirring, mixing, chopping
and whipping ingredients. The order of
selecting modes is irrelevant. You can set the
temperature and then set the speed, or you
can set speed and then the temperature.
You can change speed level and temperature
while cooking. If you are using

“HEAT” mode

and

“STIRRING” mode

, the temperature in

the cup is rising evenly which leads to a gentle
cooking and prevents food from scorching.
If you are using high temperature and

“MIXER/ BLENDER” mode

, when temperate

gets higher than 60 °С, the speed level drops

to 5, to avoid spattering of food.

“TURBO” MODE

In standby mode press and hold

button. A