18
19
OPERATION
OPERATION
SWITCHING ON THE DEVICE
Set the device on a clean, solid, flat surface,
so it could not slip. For a stable operation and
right weigh of the ingredients, the device must
be set horizontally.
Plug in the device. Then turn the red knob,
which is situated near the cord, to the «-»
mark. You will hear a sound signal and
display’s backlight will lit, which means that
the device is working. On the display you will
see “
TIME
”, the device is in a standby mode
and is ready to work. Press any button to exit
the standby mode.
Make sure that the cord isn’t tensioned,
so that the scales can work properly.
Do not place the device on the cord or
the scales will not work properly.
SETTING THE MIXER BOWL
Add all necessary ingredients into the mixer
cup, according to the recipe.(pic. 1)
To lock the mixer cup’s lid, turn it clockwise
till the
mark (pic. 2).
Close the lid’s opening with the measuring cup
(pic. 3). Before setting the mixer cup, make sure
that no foreign object got into the slot.
Set the mixer cup with the handle forward
(pic. 4). Push it softly until you hear a click.
Then turn on the kitchen machine.
SELECTING THE MODE
After you added all the necessary ingredients
and set the mixer cup, if required set the cooking
time according to the recipe. Now it is necessary
to select a cooking mode. On the control panel,
select one of the modes “
KNEAD DOUGH
”,
“
MIXER/BLENDER/STIRRING
”, “
HEAT
”,
“
COOKING
” or “
TURBO
”. Then press
button.
рiс. 1
рiс. 2
pic. 3
рiс. 4
NOTE!
For safety, when
operating the lid locks to
revents its opening.
The display will show a countdown of the
cooking time.
When the cooking process is finished you will
hear a sound signal and display will show “
End
”.
Press button whenever the display shows
“
End
”, to move to any other.
If it is necessary to weigh the ingredients, put
them on the glass plate and push “SCALES”
button. Maximal weight – 3 kg.
MODES
“
STIRRING
” mode.
Suitable for soft stirring of the food (without
chopping it) and for stew.
“
MIXER/BLENDER
” mode.
Suitable for rough, small and very thin chopping,
mixing and preparing mash.
“
KNEAD DOUGH
” mode.
Is used for kneading dough. Irregular movement
of the blades mimics the movements of chef’s
hands when kneading dough.
“
COOKING
” mode.
Cooking with stirring at 100 °С. Only this mode is
used when steam cooking. Suitable for boiling,
frying, preparing sauces.
“
HEAT
” mode.
Helps to heat or boil food thanks to the
temperature diapason from 37 up to 100 °С.
“
TURBO
” mode.
Suitable for rough chopping of large amount
of ingredients and for ice crushing. Chopping
ingredients on ultrahigh speed. The process goes
on as far as the button is pressed.
ELECTRIC CLOCK
The electric clock is displayed when, the device
is in standby mode or turned off. To change time
press and hold
button for 2 seconds to go
into “
CLOCK
” mode (24 h format). Press “
+
” or
“
-
” buttons to set the hour. Then press
, button
again to change minutes. Confirm the set time by
pressing
button and the device will go into a
standby mode.
STANDBY MODE
If the device is plugged in, but is not used, in 15
minutes it will automatically go into a standby
mode. In this mode, all its functions are turned
off, except for the display, which shows current
time. Electricity consumption in this mode is less
than 1 watt.
To exit standby mode, press any button on the
control panel.
NOTЕ!
If you unplug the device
or turn off the toggle switch on the
rear panel, the device will reset all
settings.
