background image

OTHER

25

Date of manufacture

Each product has a unique serial number in 
the form of alphanumeric row and is duplicated 
with a barcode that contains the following 
information: name of the product group, date 
of manufacture, serial number of the product. 
Serial number is located on the rear of the 
product, on the package and the warranty 
card.

1

 The first two letters - correspondence to the 

product group (hand blender - HB).

2

 The first two digits - the year of production. 

3

 The second two digits - production week.

4

 Last digits - serial number of the product.

Note!      

To avoid misunderstandings, 

we highly recommend you to 
read carefully the instruction 
manual and the warranty 
obligations. Check the 
correctness of the warranty 
card. Warranty card is valid 
only if the following are 
correctly and clearly stated: 
model, serial number, date 
of purchase, clear stamps, 
buyer’s signature. The serial 
number and the model of 
the device must be the 
same as in the warranty 
card. If these conditions 
are not fulfilled or the data 
specified in the warranty 
card was changed, the 
warranty card is invalid.

HB1225011234567

1 2 3

4

Summary of Contents for HB6060





























Reviews: