Oursson CM0400, Instruction Manual

Page: 12 / 64

12
CLEANING AND MAINTENANCE,
Рiс. E
Clean all the parts of the device immediately after
use.
• Unplug the device and let it cool completely. Lightly press
the anti-drip valve 3-4 times, to drain all the water. Jug with
lid, filter, measuring spoon, water tank and inner lid wash
with warm water and detergent. You cannot wash coffee
maker’s parts in the dishwasher, besides jug with lid.
• If necessary, clean the filter with soft brush, Рiс. D-9.
• Wipe the body of the device with damp cloth, Рiс. D-8.
Wipe the heating plate surface with dry soft cloth.
• Never immerse the body of the device into the water to
avoid electric shock.
• After cleaning, thoroughly dry all elements of the device.
REMOVING SCALE
Possible Problem Possible Cause Solutions
Device doesn’t turn on • No voltage in the socket.
• Unplug the device and wait until the voltage
recovers.
Device isn’t working
• No water in the tank.
• The lid of the device isn’t closed.
• Fill the water tank to the MAX.Turn off the
device and turn it back on after 10-20 seconds.
• Close the lid.
When using coffee
grinder coffee is not
strong.
• Use coffee beans of stronger varieties or with a
more intense flavor.
• Make sure that the number of cups selected
matches the amount of water in the container.
Coffee continues to drip
after preparation.
• “Drop-stop” system is clogged.
• Wash the water tank and coffee container, as
well as the «drop-stop» system.
Coffee isn’t hot
enought.
• Scale has formed.
• Before brewing coffee, rinse the jug with hot
water.
• Clean the device from scale.
POSSIBLE PROBLEMS AND SOLUTIONS
*Products should be stored in dry, ventilated warehouses at temperatures below - 25°C.
Specifications
Model
CM0400G
Power consumption, W Max 900
Rated voltage 220-240 V~; 50-60 Hz
Class of protection against electrical shock
I
Storage and transportation temperature
- 25°C to + 35°C
Operating temperature from +5°C to + 35°C
Humidity Requirements 15-75% without condensate
Dimensions, mm
250x160x290
Weight, kg
2,92
PRODUCT CERTIFICATION
For information on product certification, see
http://www.oursson.com
or ask seller for a copy.
Only a qualified specialist of an authorized service center OURSSON AG can repair the juice maker.
It is recommended to clean the coffee maker from scale
approximately once every two months. It is recommend
-
ed using special detergents for cleaning coffee makers.
1. Fill the water tank to the MAX with water and special
detergents for cleaning scale (see instructions). You
may also use lemon acid. For this, it is necessary to
mix 0,5 l. of water and 2 tablespoons of lemon acid.
2. Place the glass jug onto the heating plate.
3. Make sure the filter and inner lid are installed correct
-
ly. No coffee.
4. Plug in the device. button indication will lit.
5. Turn the switch into the position. Press button.
6. When the water is drained, turn off the coffee maker
and leave the solution for 15 minutes. Then pour the
solution out of the jug. Repeat steps 1-6 about 3-4
times.
7. Pour clean water into the container. Repeat steps 1-6
with clean water 2 times.
8. Rinse the jug with a lid, filter, water tank and inner
lid, Pic. E.