Otto Bock SKIPPI, Service Manual

Page: 28 / 72

Service Work
Skippi 28 | Ottobock
6.8 Footrests
The footrests are easy to remove. To remove the footrest, pull the release lever towards the
footrest. Now pull the footrest up out of the holding device.
For mounting, slide the footrest into the holder from above, pull the lever and turn the footrest
until the centrings engage with positive locking.
Fig. 18 Footrest with unlock lever
By loosening the screws on the telescoping footrest tube at the top and bottom, the footplate
can be adapted to the lower leg length and to the thickness of the child's seat cushion.
To set the lower leg length you need a size 5 Allen wrench.
Fig. 19 Adjusting the lower leg length
Ensure that the telescoping tubes of both footrests are set equally. Use a folding ruler, if nec-
essary.
The angle of the footplate can be changed by loosening the attachment screw on the front of
the footrest bar. Again, you need a size 5 Allen wrench.