Service Work
Skippi
26 | Ottobock
Replacing the seat
The entire seat of the Skippi can easily be disassembled for removal or replacement. Make
sure to first disconnect the control cable to avoid damaging the cables and plug connections.
At the rear, the seat is secured with one screw connection on each side, left and right. Use
two size 5 Allen wrenches to loosen these screw connections.
Fig. 14 Loosening the rear screw connection of the seat
At the front, the seat is attached with the seat angle adjustment mechanism. Here, loosen the
seat at the bottom of the angle adjustment mechanism, which is attached to the frame. Loos-
en the screw using a size 5 Allen wrench.
Once you have loosened all connections, you can remove the seat.
Lap belt
The lap belt of the Skippi is/must be attached to the bearing plate. For attachment, an attach-
ment plate with eyelet is used. The mounting kit of the lap belt also includes spacer bushings.
Place these bushings between the eyelet and bearing plate. For tightening the screw use a
size 5 Allen wrench and a size 13 open-end wrench.
Fig. 15 Attaching the lap belt
Summary of Contents for SKIPPI
Page 1: ...Skippi Service Manual ...
Page 2: ......
Page 69: ...Skippi Ottobock 69 ...
Page 70: ...Skippi 70 Ottobock ...