Service Work
Skippi
Ottobock | 23
6.5 Side panel
To replace the whole side panel, loosen the thumb screw located on the bottom side of the
panel attachment device.
Fig. 9
Loosening the thumb screw
Above this thumb screw, there is a set screw for setting the armrest height. Loosen this set
screw using a size 3 Allen wrench. Set the desired armrest height and retighten the set screw.
Fig. 10 Setting the height of the side panel
Changing the position of the side panels
Side panel mounting brackets are located on the left and right sides of the seat frame. By
loosening the two set screws which are located on the underside, you can change the posi-
tion of the side panel.
Afterwards, retighten the set screws using a size 3 Allen wrench.
Summary of Contents for SKIPPI
Page 1: ...Skippi Service Manual ...
Page 2: ......
Page 69: ...Skippi Ottobock 69 ...
Page 70: ...Skippi 70 Ottobock ...