11
Removal of side panel
1) Loosen the thumb screw on the side panel holder
(see fig. 11, arrow).
2) Pull the side panel out from the side panel holder
and set it aside.
3)
Only for side panel with control panel:
Carefully
let the side panel with the control panel hang down
while getting in.
For transporting the power wheelchair, place the
side panel on the seat.
Installing the side panel
1) Insert the side panel into the side panel holder.
2) Re-tighten the thumb screw on the side panel hold
er (see fig. 11, arrow).
Recaro
®
seat
To remove/install the side panel on the Recaro
®
seat: see Page 44.
8.3 Footrest
CAUTION
Exposed pinch points
Crushing, pinching due to incorrect handling
►
Do not reach into the danger area with your fingers when folding the footrest up or down.
The user's feet can be placed on the footrest.
The height of the footrest has been adjusted by qualified personnel to the length of the user's lower leg.
8.3.1 Folding the footrest up/down
All footrest (footplate) versions can be folded.
12
Folding up the footrest
1) Grasp the footrest.
2) Fold up the footrest.
Folding down the footrest
1) Grasp the footrest.
2) Push the footrest down.
8.4 Backrest
CAUTION
Exposed pinch points
Crushing, pinching due to incorrect handling
►
Do not reach into the danger area with your fingers when folding the backrest up or down.
The backrest provides pressure redistribution and support for the upper body.
8.4.1 Folding the backrest up/down
The wheelchair may be delivered with the backrest folded down. It has to be folded up and secured prior to use.
20 | Ottobock
Use
C2000
Summary of Contents for C2000
Page 1: ...C2000 Instructions for use 3 ...
Page 69: ...Ottobock 69 C2000 ...
Page 70: ...C2000 70 Ottobock ...