Otto Bock C2000, Instructions For Use Manual

Page: 11 / 72

Label Meaning
G Serial number (including year of manufacture)
H
Maximum load capacity (see section "Technical data")
I
Maximum climbing ability (see section "Technical data")
J
Maximum speed (see section "Technical data")
K
Allowable axle load, front
L
Allowable axle load, rear
M
Maximum gross weight
N
Manufacturer information/address
The nameplate is located below the seat.
O
CE marking – product safety in accordance with EU directives
D Depending on the version of the nameplate:
The product
has not been approved by the manufacturer for use as a seat in
vehicles for transporting persons with reduced mobility
4.6.2 Warning labels
Label Meaning
A
Power driving mode: lock motor brake
B
Manual driving mode: unlock motor brake
Risk of pinching. Do not reach into the danger area.
5 Delivery
5.1 Scope of delivery
The power wheelchair is normally shipped fully assembled and fitted to the personal requirements of the respective
user.
The scope of delivery includes:
•
Fitted power wheelchair with main components
• Installed options
• Battery charger
• Instructions for use
5.2 Options
The standard model can be fitted to the user's personal requirements thanks to a large range of options.
A full list of the available modules and accessories is shown on the order form and in the accessories catalogue.
To use options: see Page 19 et. seq.
5.3 Storage
5.3.1 Storage during daily use
The power wheelchair should always be protected against external influences.
The control unit must be turned off.
5.3.2 Storage during extended disuse
NOTICE
Deep discharge
Battery damage due to standby current
► Deactivate the circuit breaker if the wheelchair is not used for more than 3 days.
► To deactivate the circuit breaker: see Page 19
Please observe the following if the power wheelchair is not used for more than
3 days
:
Ottobock | 11 C2000
Delivery