Otto Bock 743A250, Instructions For Use Manual

Page: 14 / 56

4.4 Connecting the base station to the power supply
10
The base station is switched on when it is connected to the power supply.
► Use the plug (type C) for outlets of types F, E, K, L and J.
►
Use the plug (type A (NEMA-1)) for outlets of type A (NEMA-1) and type B (NEMA-5).
► For other types of outlets, use an adapter from a specialist shop which is suitable for the connected loads of
the power supply (100–240 V/50–60 Hz).
► Connect the base station to the power supply.
→ The base station is ready after a few minutes (approx. 5 min) when the three status LEDs on the front are
illuminated continuously.
14
Preparing product for use
743A250 Bionic Pro