Otto Bock 743A250, Instructions For Use Manual

Page: 27 / 56

5.5.6.1 Instructions for use
Gebrauchs-
anweisung
100 %
1234567.bionicpro.local
100 %
1234567.bionicpro.local
Ottobock SE & Co. KGaA
Max-Näder-Straße 15 · 37115 Duderstadt · Germany
T +49 5527 848-0 · F +49 5527 848-3360
healthcare@ottobock.de · www.ottobock.com
© Ottobock · 647G1361=de_INT
-01-1911
© Ottobock · 647G1361=de_INT
-01-1911
32
Tapping the “Instructions for use” button opens the digital version of the instructions for use (PDF file) in a separ­
ate tab in the Safari browser. The instructions for use are kept up to date when the base station is updated. The
version number and the publication date (example : 01-1911 = version number 01, publication date 1911 ~
November 2019) are found on the last page of the instructions for use so you can check whether the digital version
is newer than the printed version. The instructions for use are displayed in the language set under “Adjust settings”
(see Page 28). The digital version may also be printed out. The icon
can be used to close the tab.
5.5.6.2 System information
System
Informationen
Systeminformationen
Version 2019.6.24.dev0+git44698e5f
Basis-Station Zurücksetzen
Achtung: Alle Daten inkl. der Patienten- und
Messdaten werden gelöscht.
Serial
Freier Speicher
fffffff
9.9 GB
Lokale IP Addresse 172.28.1.1
Datum/Zeit Wed Jun 26 13:05:17 UTC
C Sensor
v.18.6.6
20311238
FL Sensor
v.18.6.6
20311238
P Sensor
v.18.6.6
20311238
T Sensor
v.18.6.6
20311238
FR Sensor
v.18.6.6
20311238
Reset
100 %
1234567.bionicpro.local
P Sensor
v.18.6.6
20311238
Basis-Station Zurücksetzen
Achtung: Alle Daten inkl. der Patienten- und
Messdaten werden gelöscht.
Reset
Benutzername eingeben
33
Tapping the “System information” button displays important system information.
► Only tap the “Reset” button when you want to completely reset the base station (
Please note! All data
including the patient and measured data will be deleted and cannot be retrieved again.
– After tapping
the button, the word “RESET” also has to be entered to confirm that the base station should really be reset.)
The following important information is displayed for all sensors:
: Battery icon displays the charge level.
: Version number of the sensor firmware.
: Button – tapping this button causes the LED of the corresponding sensor to flash in the colour pink for several
seconds.
: Internal number of the sensor.
27 743A250 Bionic Pro
Use