Otto Bock 4R57-WR, Instructions For Use Manual

Page: 23 / 356

4.5 Patient information
CAUTION
Penetration of dirt and humidity into the product
> Falling due to unexpected product behaviour as the result of a malfunc­
tion.
> Falling due to breakage of load-bearing components.
► Ensure that no solid particles or foreign objects can penetrate into the
product.
► The product is waterproof and resistant to corrosion, and can therefore
be operated in fresh water as well as salt water and chlorinated water.
Do not use the product under extreme conditions like diving or jumping
into water. The product is designed for underwater use.
►
After using the product in salt water or chlorinated water, rinse the
product with fresh water, dry it with a lint-free cloth and allow it to air
dry fully.
►
If the product comes into contact with solutions other than fresh
water, salt water or chlorinated water
,
promptly rinse the product
with fresh water and allow it to dry.
►
In case of a malfunction after drying, the product must be inspected by
an authorised Ottobock Service Centre. The O&P professional is your
contact person.
►
The product is not resistant to penetration from water jets or steam.
CAUTION
Overloading due to unusual activities
Falling due to breakage of load-bearing components.
► The product was developed for everyday use and must not be used for
unusual activities. These unusual activities include, for example,
extreme sports (free climbing, paragliding, etc.).
► Careful handling of the product and its components not only increases
their service life but, above all, ensures your personal safety!
► If the product and its components have been subjected to extreme
loads (e.g. due to a fall, etc.), then the product must be inspected for
damage immediately by an O&P professional. If necessary, he or she
will forward the product to an authorised Ottobock Service Centre.
23