5.2.2 Static Alignment
•
Ottobock recommends checking the alignment of the prosthesis using
the L.A.S.A.R. Posture and adapting it as needed.
•
If necessary, the alignment recommendations (TF modular leg pros
theses:
646F219*
, TT modular leg prostheses:
646F336*
) may be
requested from Ottobock.
5.2.3 Dynamic Trial Fitting
•
Adapt the alignment of the prosthesis in the frontal plane and the sagittal
plane (e.g. by making angle or slide adjustments) to ensure an optimum
gait pattern.
•
TT fittings:
Make sure that physiological knee movement in the sagittal
and frontal plane is achieved when the leg begins to bear weight after
the heel strike. Avoid medial movement of the knee joint. If the knee joint
moves in the medial direction in the first half of the stance phase, move
the prosthetic foot in the medial direction. If the medial movement occurs
in the second half of the stance phase, reduce the exterior rotation of the
prosthetic foot.
6 Cleaning and Care
1) Clean the product with a damp, soft cloth.
2) Dry the product with a soft cloth.
3) Allow to air dry in order to remove residual moisture.
7 Maintenance
•
The prosthesis components should be inspected after the first 30 days of
use.
•
Inspect the entire prosthesis for wear during normal consultations.
•
Conduct quarterly safety inspections.
8 Disposal
This product may not be disposed of with regular domestic waste in all juris
dictions. Disposal that is not in accordance with the regulations of the coun
try where the product is used may have a detrimental impact on health and
the environment. Please observe the information provided by the responsible
authorities in the country of use regarding return and collection processes.
9 Legal information
All legal conditions are subject to the respective national laws of the country
of use and may vary accordingly.
12
Summary of Contents for 1K10
Page 2: ...1K10 1K30 1S30 1 2 2 ...
Page 135: ...135 ...
