Otto Bock 1G9, Instructions For Use Manual

Page: 11 / 196

properties are achieved through the combination of a contoured core and
functional foam.
1.2 Combination possibilities
This prosthetic component is compatible with Ottobock's system of modular
connectors. Functionality with components of other manufacturers that have
compatible modular connectors has not been tested.
Limited combination options for Ottobock components
Modular foot adapter
1G9 2R51*
1H32, 1H34, 1H38, 1H40 2R10*, 2R33*, 2R51*
2 Intended use
2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
The product is suitable for fittings of geriatric patients.
2.2 Area of application
Our components perform optimally when paired with appropriate compon­
ents based upon weight and mobility grades identifiable by our MOBIS clas­
sification information and which have appropriate modular connectors.
m°
kg
The product is recommended for mobility grade 1 (indoor walk­
er).
The product must be used in TF prostheses only.
•
The maximum approved body weight is specified in the technical data
(see Page 16).
• The bilateral use of 1H* prosthetic feet imposes stricter requirements for
the user's balance.
2.3 Environmental conditions
Allowable environmental conditions
Temperature range for use: -10 °C to +60°C
Allowable relative humidity 0 % to 90 %, non-condensing
Unallowable environmental conditions
Mechanical vibrations or impacts
Perspiration, urine, fresh water, salt water, acids
Dust, sand, highly hygroscopic particles (e.g. talcum)
11