ET42202M-S-PD
L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or
100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs
www.ot-systems.com Ver.1.0
200
2-23 Switch2go
2-23.1 Switch2go setting
Configure Switch2go management and link setting.
Web Interface
To configure Switch2go setting in the web interface:
1. Click Configuration, Switch2go and and Switch2go setting.
2. Set the parameters
3. Click Apply.
Figure 2-23.1: The Switch2go setting
Parameter description:
Management mode :
Indicates the Management mode operation. When the mode operation is enabled, the message will
send out to (or get from) the server. The protocol is based on TCP communication and received on
TCP port 443 and the server will send acknowledgments/information back sender since TCP is a
connection-oriented protocol. Possible modes are:
Enabled: Enable Switch2go Management mode operation.
Disabled: Disable Switch2go Management mode operation.
Server Address :
Indicates the IPv4 host address of server. If the switch provide DNS feature, it also can be a host name.
