ET42202M-S-PD
L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or
100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs
www.ot-systems.com Ver.1.0
261
3-6.2 Port Status
This section describes that when you complete to set LACP function on the switch then it
provides a Port Status overview for all LACP instances
Web Interface
To display the LACP Port status in the web interface:
1. Click Monitor, LACP, Port Status
2. If you want to auto-refresh the information then you need to evoke the “Auto-refresh”.
3. Click “Refresh“ to refresh the LACP Port Status.
Figure 3-6.2: The LACP Status
Parameter description:
Port :
The switch port number.
LACP :
'Yes' means that LACP is enabled and the port link is up. 'No' means that LACP is
not enabled or that the port link is down. 'Backup' means that the port could not
join the aggregation group but will join if other port leaves. Meanwhile it's LACP
status is disabled.
Key :
The key assigned to this port. Only ports with the same key can aggregate
together.
Aggr ID :
The Aggregation ID assigned to this aggregation group. IDs 1 and 2 are GLAGs
while IDs 3-14 are LLAGs.
Partner System ID :
The partner's System ID (MAC address).
Partner Port :
The partner's port number connected to this port.
Partner Prio:
The partner's port priority.
Buttons
