OTS ET42202M-S-PD User Manual Download Page 239

Page: 239 / 332

ET42202M-S-PD

L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base-T or

100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs

www.ot-systems.com Ver.1.0

228

The number of NAK (option 53 with value 6) packets received and transmitted.

Rx and Tx Release:

The number of release (option 53 with value 7) packets received and transmitted.

Rx and Tx Inform:

The number of inform (option 53 with value 8) packets received and transmitted.

Rx and Tx Lease Query:

The number of lease query (option 53 with value 10) packets received and transmitted.

Rx and Tx Lease Unassigned:

The number of lease unassigned (option 53 with value 11) packets received and transmitted.

Rx and Tx Lease Unknown:

The number of lease unknown (option 53 with value 12) packets received and transmitted. Rx and Tx
Lease Active

Rx and Tx Lease Active:

The number of lease active (option 53 with value 13) packets received and transmitted.

Rx Discarded checksum error:

The number of discard packet that IP/UDP checksum is error.

Rx Discarded from Untrusted:

The number of discarded packet that are coming from untrusted port.

Summary of Contents for ET42202M-S-PD













































































































































































































































































































































Search results

Summary of Contents for ET42202M-S-PD

Reviews:

Related manuals for ET42202M-S-PD

Brands by name

Popular brands

OTS ET42202M-S-PD, User Manual

Search results

Summary of Contents for ET42202M-S-PD

Reviews:

Related manuals for ET42202M-S-PD

Brands by name

Popular brands