ET42202M-S-PD
L2+ Managed 20
100/1000Base-FX SFP Combo Optical Ethernet Switch with AC + DC inputs
www.ot-systems.com
Disabled is displayed, the rate limiter operation is disabled.
Port Copy :
Indicates the port copy operation of the ACE. Frames matching the ACE are
copied to the port number. The allowed values are Disabled or a specific port
number. When Disabled is displayed, the port copy operation is disabled.
Mirror :
Specify the mirror op
Enabled:
Frames received on the port are mirrored.
Disabled:
Frames received on the port are not mirrored.
The default value is "Disabled".
Logging :
Indicates the logging operation of the ACE. Possible val
Enabled:
Frames matching the ACE are stored in the System Log.
Disabled:
Frames matching the ACE are not logged.
Please note that the System Log memory size and logging rate is limited.
Shutdown :
Indicates the port shut down operation of the
Enabled:
If a frame matches the ACE, the ingress port will be disabled.
Disabled:
Port shut down is disabled for the ACE.
Counter :
The counter indicates the number of times the ACE was hit by a frame.
Modification Buttons
You can modify each ACE (Access Control Entry) in the table using the following
buttons:
: Inserts a new ACE before the current row.
: Edits the ACE row.
: Moves the ACE up the list.
: Moves the ACE down the list.
: Deletes the ACE.
: The lowest plus sign adds a new entry at the bottom of the
MAC Parameter:
SMAC Filter
(Only displayed when the frame type is Ethernet Type or ARP.)
Specify the source MAC filter for this ACE.
Any: No SMAC filter is specified. (SMAC filter status is "don't
Specific: If you want to filter a specific source MAC address with this ACE, choose
this value. A field for entering an SMAC value appears.
SMAC Value
When "Specific" is selected for
MAC address. The legal format is "xx
"xxxxxxxxxxxx" (x is a hexadecimal digit). A frame that hits this ACE matches
this SMAC value.
L2+ Managed 20-port 100Base-FX/1000Base-X SFP + 4-port 10/100/1000Base
FX SFP Combo Optical Ethernet Switch with AC + DC inputs
78
Disabled is displayed, the rate limiter operation is disabled.
Indicates the port copy operation of the ACE. Frames matching the ACE are
copied to the port number. The allowed values are Disabled or a specific port
number. When Disabled is displayed, the port copy operation is disabled.
Specify the mirror operation of this port. The allowed values are:
Frames received on the port are mirrored.
Frames received on the port are not mirrored.
The default value is "Disabled".
Indicates the logging operation of the ACE. Possible values are:
Frames matching the ACE are stored in the System Log.
Frames matching the ACE are not logged.
Please note that the System Log memory size and logging rate is limited.
Indicates the port shut down operation of the ACE. Possible values are:
If a frame matches the ACE, the ingress port will be disabled.
Port shut down is disabled for the ACE.
The counter indicates the number of times the ACE was hit by a frame.
Modification Buttons
can modify each ACE (Access Control Entry) in the table using the following
: Inserts a new ACE before the current row.
: Edits the ACE row.
: Moves the ACE up the list.
: Moves the ACE down the list.
: Deletes the ACE.
plus sign adds a new entry at the bottom of the ACE listings.
(Only displayed when the frame type is Ethernet Type or ARP.)
Specify the source MAC filter for this ACE.
Any: No SMAC filter is specified. (SMAC filter status is "don't-care".)
Specific: If you want to filter a specific source MAC address with this ACE, choose
this value. A field for entering an SMAC value appears.
When "Specific" is selected for the SMAC filter, you can enter a specific source
MAC address. The legal format is "xx-xx-xx-xx-xx-xx" or "xx.xx.xx.xx.xx.xx" or
"xxxxxxxxxxxx" (x is a hexadecimal digit). A frame that hits this ACE matches
port 10/100/1000Base-T or
Ver.1.0
Indicates the port copy operation of the ACE. Frames matching the ACE are
copied to the port number. The allowed values are Disabled or a specific port
number. When Disabled is displayed, the port copy operation is disabled.
eration of this port. The allowed values are:
ues are:
Frames matching the ACE are stored in the System Log.
Please note that the System Log memory size and logging rate is limited.
ACE. Possible values are:
If a frame matches the ACE, the ingress port will be disabled.
The counter indicates the number of times the ACE was hit by a frame.
can modify each ACE (Access Control Entry) in the table using the following
ACE listings.
(Only displayed when the frame type is Ethernet Type or ARP.)
care".)
Specific: If you want to filter a specific source MAC address with this ACE, choose
the SMAC filter, you can enter a specific source
xx" or "xx.xx.xx.xx.xx.xx" or
"xxxxxxxxxxxx" (x is a hexadecimal digit). A frame that hits this ACE matches
