1. Open the printer cover.
2. Remove the spool of the used paper roll.
3. Loosen the paper end edge from the new paper roll.
4. Make sure that the paper compartment is clean.
5. Place the paper roll in the compartment with the loose end opening towards
the back of the compartment and upwards from the bottom of the com-
partment. When you pull the paper upwards before closing the cover, you
will see the Otometrics watermark.
6. Tear off the part of the paper where glue has held the roll together.
7. Make sure that the loose end of the paper roll emerges through the paper
slot.
8. To close the printer cover, press the printer cover into place until the lock
clicks shut.
5
The Quick Check probe
Zodiac is delivered with the Quick Check probe already connected.
9
User Guide
Otometrics - MADSEN Zodiac
