otometrics madsen itera ii Reference Manual Download Page 102

Page: 102 / 134

Communicating with the device

Connecting to the device

OTOsuite is designed to communicate with and display test data generated by Otometrics test devices.

•

When you start up OTOsuite, click on the

Control Panel

icon. OTOsuite will automatically connect to the test device.

•

See also the section "Activating the Control Panel" in the OTOsuite User Guide.

Firmware update

If a Firmware Update message appears, see:

•

Updating device firmware

►

102

Information about the test device

To see information relating to the test device, select

Help

About Device

12.1

Reconnecting to the device

If the control panel for a test type is shown, and communication with the selected test device is interrupted, a message
appears stating that there is no longer connection to the device.

•

Click the

Connect

button on the

Control Panel

to reconnect to the selected test device.

Information about the test device

To see information relating to the test device, select

Help

About Device

12.2

Updating device firmware

If the OTOsuite software version contains a more recent firmware for the device, a message will appear when next you
switch on the device.

It is recommended that you update the device firmware to make sure that the device and OTOsuite perform correctly.

•

Follow the on-screen instructions.

102

Otometrics - MADSEN Itera II

12 Communicating with the device

Summary of Contents for madsen itera ii







































































































































Search results

Summary of Contents for madsen itera ii

Reviews:

Brands by name

Popular brands

otometrics madsen itera ii, Reference Manual

Search results

Summary of Contents for madsen itera ii

Reviews:

Brands by name

Popular brands