2
II. INSTALLATION
After unpacking the instrument, remove any packing debris from around the control console
and the delivery head. Make certain that the delivery cable has not been twisted or kinked.
The system is designed to be used at any convenient level such as a table, cart or bench
surface. A clear 18" x 18" area is required. Figure 1 shows a typical VNG/ENG examination
room layout.
Connections to the computer-based CHARTR 200 VNG/ENG can be made. In order to
understand how these connections are made, please refer to section IIIB (Rear Panel
Connectors).
The capacitor that provides power to maintain the temperature and time setpoints on the unit
may need to be recharged prior to the unit being used. Please refer to section IIID for
instructions on how to do this.
NOTE: Before applying line power to the NCA-200, verify that the unit is set up for the
appropriate line voltage. Please refer to section IIIB (Rear Panel Connectors).
