manualshive.com logo in svg

Otodynamics Otocheck ABR, User Manual, Page: 115 / 152

Share
Download
Otodynamics Otocheck ABR User Manual Download Page 115

Otocheck ABR

User Manual

115

Power

17

 Power

 

Important Note:

Only charge your Otocheck with the charger supplied by 

Otodynamics.

17.1

  Battery life

 

The instrument is powered from the Otocheck’s internal rechargeable 

battery.  The battery will provide enough power for over 100 ABR tests from 

a single charge with a battery life of up to 8 hours.  Note that the battery 

life depends on the Otocheck usage pattern.  With built in power save 

functions and by switching the device off for the periods between tests, the 

battery will provide enough power for over a week’s intensive use. 

17.2

  Initial charge

 

However, the battery will discharge slowly, even if the device is switched 

off.  It is therefore recommended that an initial charge is provided to fully 

charge the battery before using your Otocheck for the first time.   

The Otocheck may be charged in situ via the 

Charger and PC cable 

socket 

at the lower end of the ABR Module.

Summary of Contents for Otocheck ABR

























































































































































Reviews:

No comments