![background image](http://html1.mh-extra.com/html/otis/gen2-notis-quad-oi-6940/gen2-notis-quad-oi-6940_operation-manual_1658589031.webp)
Sensor Return Null/Cal to Default...
5. If
ADD
(YES) was touched, the Display Screen will ask for confirmation (as shown below). Touch
ADD
(YES) or
SUB
(NO) to confirm or deny the option to return Sensor 1's Null/Cal to default.
6. Once the selection has been made, the Display Screen will return to the “Sensor 1 Return Null/Call to Default”
screen. Touch
ADD
(NEXT) to continue to the next screen.
7. Select one of the following options:
•
Touch
ADD
(NEXT) to return to the Sensor Setup Menu Mode.
NOTE: All sensors must be setup individually. To setup the next sensor, use this option (touch ADD),
then touch ADD (NEXT) again to move to Sensor 2 Setup. Once Sensor 2 has been setup, repeat the
Sensor Setup Menu Mode steps again for Sensor 3 and Sensor 4.
•
Touch
MENU
(SELECT) or
BACK
(BACK) to return to the first Global Settings Menu Mode screen
•
Touch
SUB
(PREV) to return to the previous Global Settings Menu Mode setting: Return to Factory
Default Setting.
31