OTIS GEN2 Notis Quad OI-6940, Operation Manual, Page: 27 / 53

Sensor Cal Method
1. Touch ADD (NEXT) to continue to the next setting: Sensor 1 Cal Method.
2. Touch MENU (SELECT) to begin adjust the Sensor 1 Cal Method; touch ADD (NEXT) to continue to the next
menu option.
3. If MENU was touched, the Display Screen should resemble one of the following illustrations:
4. Touch ADD (NEXT) or SUB (PREV) to toggle between “Manual” or “Auto” as the Sensor 1 Calibration Method
Setting.
NOTE: Cal Method is not available for LEL sensors.
5. Once the desired Sensor 1 Calibration Method Setting is displayed on the screen, touch MENU (BACK) or BACK
(BACK).
27