![background image](http://html1.mh-extra.com/html/otis/gen2-notis-quad-oi-6940/gen2-notis-quad-oi-6940_operation-manual_1658589011.webp)
Power On cont...
2. The Notis Quad will then countdown from 30 to 0. During the countdown, the Display Screen will scan through a
series of logos, as well as continuously display sensor assembly information, as follows:
▪
From 60 to 45, the Display Screen will show the Otis Instruments, Inc. logo and unit information.
▪
From 44 to 30, the Display Screen will show the Gen II logo and unit information.
▪
From 29 to 15, the Display Screen will show the WireFree logo and unit information.
▪
From 14 to 0, the Display Screen will show the Notis Quad logo and unit information.
3. When the Notis Quad's Display Screen resembles the following illustration, the device is in Normal Operating
Mode and ready to operate.
NOTE: If the Notis Quad is in Fault, the Display Screen will show “F_” instead of the gas-type unit of
measure for the sensor that is in fault.
For additional information regarding system faults, see the OI-6940 Notis Quad Troubleshooting Guide of this operation
manual.
11