37
2)
After DVR network setting, install the remote viewer to computer. Computer network IP also need to
setup on local IP address such as 192.168.0.6. DVR and computer IP address cannot equal.
-Always 0080 port.
WAN (World Area Network)
1) User apply fixed IP from network, then input IP Gateway, and Subnet mask address to DVR TCP-UP setup.
2) Advice user apply network speed Upload 512K / Download 512K, to avoid image data too big influence the
remote quality.
The network traffic jam always make data transfer slow, it is normal.
3)
After DVR TCP-IP setup, install the remote viewer to computer. See the remote viewer page.
-Port is depend on network company area, but normally is 0080 port.
5. PASSWORD SETUP
1)
LEVEL (Log In level ID type setup)
>NONE / ADMIN / USER
-ADMIN is the highest-level ID
-USER is the highest-level ID
-NONE, user does not need to insert password before enter in MENU.
2)
ADMIN password
>44444 (Factory Default)
3)
USER password
>11111 (Factory Default)
PASSWORD SETUP PAGE
1. LEVEL:( )
2. ADMIN:( )
3.
USER :( )
Press values change button to change values.
Press direction buttons up/down/left/right to
Choose items position.
ADVANCED SETUP PAGE
1. ALARM SETUP
2. MOTION SETUP
3. RECORD SETUP
4. TCP -IP SETUP
5. PASSWORD SETUP
6. HDD FORMAT
7. HDD AUTO DETECT
8. FACTORY DEFAULT
Notice:
Password always 5 character input cannot < 5 characters
Summary of Contents for DVR1601X
Page 5: ...5 Unit Description of Front Panel...
Page 19: ...19...
Page 26: ...26 Press values change button or turn inner shuttle to change values...
Page 44: ...44 2 DVR system...
