47
- Input IP Address you already input into DVR unit(TCP/IP SETUP) in
IP ADDRESS.
- Input Port number you already input into DVR unit in
PORT.
Just input 80, which is
default port number.
- Input “ADMIN” in
ID.
- Input the same password you set into DVR unit in
PASSWORD.
Default password of DVR unit is “1”.
ID and PASSWORD are not supported at this time, users do not have to care about it.
- PT TYPE: This function is not available.
- Select
circular monitoring interval
ranging from 0.1 sec to 10 sec. The smaller it is, the faster picture
of each channel rotates. The absolute circulation interval is a little different from set value depending
on data transfer rate of IP network.
- Select
scan rate
ranging from 1x to 64x. The larger it is, the faster search speed is.
The absolute search speed is a little different from set value depending on data transfer rate of IP
network.
b) Scan. : Press scan button to enter into search window. Using various operation buttons, you can
search recorded pictures, save selected pictures on client PC, or print pictures. Refer to
following paragraph “3. Search recorded pictures over IP network” for details.
c) Rotate : Press rotate button to see live pictures from channel 1 to 4 in rotation. Screen division must
be set at 1 to see live pictures one after another in rotation. Speed of rotation shall be as per
settings of circular monitoring interval.
u
Run in full screen mode: Full screen monitor display.
u
Receive events: When alarm and motion and video loss, the DVR status will display.
8 PTZ control. This function is not available.
SAVE OPTION:
Choose the hard disk path where you are going to save.
2. Search recorded pictures via IP network
Summary of Contents for DVR1601X
Page 5: ...5 Unit Description of Front Panel...
Page 19: ...19...
Page 26: ...26 Press values change button or turn inner shuttle to change values...
Page 44: ...44 2 DVR system...
