2 LED Indicators
Power/Charge status
Streaming status
On/Off
Answer call
Volume
Up/Down
Directional Microphones
USB Charging
Technical Data
Name/model
ConnectClip/AC1A
FCC/IC
FCC ID: 2ACAHAC01 IC: 11936A‑AC01
Compatibility
Oticon 2.4 GHz wireless hearing instruments
Dimensions
53 x 27 x 18 mm; weight 27 g
Conditions of use
Operating humidity: 15% to 93% relative humidity, non‑condensing
Operating temperature: 5‑40 °C / 41‑104°F
Storage and transportation: ‑20‑70 °C / ‑4‑158°F
System features
Mobile phone headset (hands‑free/headset profile) & Stereo Music (A2DP)
Remote/Partner Microphone
Remote control of HI
Volume, program shift and mute of microphones in hearing instruments
Battery
1
Typical daily use 16 hours:
2 hours audio str 2 hours phone + 12 hours standby
36 hours standby (turned on, no streaming)
Charge time 2 hours
Battery total life expectancy: 80% capacity left after 720 charge/re‑charge cycles
Audio quality
2
Stereo/20 kHz sample freq.
Audio bandwidth
2
80 Hz – 10 kHz
Pairing details
Up to 8 paired Bluetooth devices
Bluetooth compliance
Version 4.2 + EDR
Bluetooth profile support
Advanced Audio Distribution Profile (A2DP) 1.3
Headset Profile (HSP) 1.2
Hands‑Free Profile (HFP) 1.6 including support for Wideband Speech
Wireless range
3
33 feet with Bluetooth Class 2 devices (e.g. mobile phones)
up to 65 feet between ConnectClip and hearing instruments
Streaming frequency
2.4 GHz (Bluetooth band)
Emissions
Max. 17 dBm e.i.r.p. in compliance with all relevant standards
Status indications
LEDs on the ConnectClip. Acoustic signals in hearing instruments
Genie 2017.2 (or later)
Firmware upgrade. Fitting of streaming programs
1. Using the supplied charger
2. Actual audio performance depending on client’s hearing instruments
3. Free line of sight between the ConnectClip and other devices. Other
devices operating in the 2.4 GHz band may interfere and reduce range.
Oticon ConnectClip
The ConnectClip is a
multipurpose device which
empowers today’s Oticon
hearing aid users to
participate and interact
in a number of everyday
situations which are at
best difficult and at worst
impossible, even with the
best hearing instruments.
ConnectClip is an intermediate device,
which wirelessly connects Oticon More,
Opn S, Opn and Xceed 2.4 GHz wireless
hearing aids through Bluetooth to most
mobile phones.
ConnectClip further doubles as a remote/
partner microphone for improved
1‑to‑1 speech understanding in adverse
listening situations.
Headset for mobile phones
ConnectClip can be paired with most
mobile phones through Bluetooth, in
effect turning the hearing instruments
into a high‑quality headset. Sound
from the mobile phone is streamed
wirelessly directly to the hearing aids,
while the ConnectClip’s directional
microphones pick up the wearer’s voice.
Headphones for music (A2DP)
Audio/music from a Bluetooth‑connected
mobile phone, MP3 player, etc., is streamed
directly in stereo to both hearing aids.
Remote/Partner microphone
The ConnectClip works in a special mode
as a remote/partner microphone for
improved intelligibility of the speaker
wearing it, either at a distance (up to 65
feet), in a very noisy environment, or in a
combination of the two.
PC/Laptop/Computer
It can at times be difficult to pair/connect
directly to a computer’s built‑in Bluetooth.
To overcome any issues, ConnectClip can
be used with the BTD800 USB dongle for
easy/hassle‑free connectivity.
For more information please visit:
www.oticon.com
Technical Data Sheet
Wireless accessories
Included
• Instructions for use
• Regular and long lanyard
• Power adapter for charging
• USB charge cable
• Protective pouch
52
53
