ConnectClip Quick Start Guide
1. Ensure ConnectClip is powered off.
Press and hold
multi‑button for approximately 6 seconds until power
indicator OFF
2. Turn both hearing aids OFF.
(Open battery drawer)
(On rechargeable: Press and hold the lower
part of the button for approx. 3 seconds)
3. Turn both hearing aids ON.
(Close battery drawer)
(On rechargeable: Press and hold the lower
part of the push button for approx. 2 seconds.)
4. The hearing aids will now be ready
for first time
connection with the ConnectClip. You now have 3
minutes to complete the pairing.
5. Turn ON ConnectClip.
Press and hold multi‑button
for approximately 3 seconds until power indicator
shows STEADY GREEN
6. ConnectClip will now search for your hearing aids.
Status indicator BLINKING YELLOW
7. Place ConnectClip and both hearing aids close to
each other
(maximum distance is 8 inches)
8. Connection established with hearing aid(s)
is
indicated by status indicator STEADY YELLOW
PAIRING CONNECTCLIP WITH HEARING AIDS
1. Pair the ConnectClip with your hearing aids before pairing
ConnectClip with your mobile phone.
2. Place ConnectClip in Pairing mode.
Press and hold the
multi‑button AND volume up button for about 6 seconds (A)
until status BLINKS BLUE
The ConnectClip will be in pairing mode for about 3 minutes.
3. Enable pairing on mobile phone.
Turn on Bluetooth. Search for and connect to/pair with ConnectClip
This is normally in the Settings/Bluetooth section of your phone.
4. Enter your pin code.
If your phone requests a pin code enter
0000 (four zeros).
5. Pairing complete.
Pairing complete with mobile phone is indicated
by status STEADY BLUE
PAIRING CONNECTCLIP WITH MOBILE PHONE
57
56
