16
OTICOn InTIGA FITTInG GUIDE
17
If the ear grip is too long in the concha it may be trimmed.
Use caution not to leave a pointed end as this may irritate
the ear.
Pull the ear grip until its top is
positioned in the slot. During
insertion, the top should point
away from the dome as illustrated.
Use a finger nail to dislodge the ear grip and push from
the other side.
1.
Insert the earpiece (Dome or Mould) into the ear canal.
2.
Place the hearing device behind the ear. The Receiver
unit with the correct earpiece should be placed far
enough into the canal so that the wire lies flush with
the client’s head. When looking directly at the client, you
should not see the Receiver wire sticking out.
3.
If necessary add the ear grip for extra retention.
Removing the ear grip
Inserting and placing the device on the ear
1
2
3
