Oti 6500 TRIO Specification
Version 1.5
Installation
Confidential & Proprietary
page 20
6.2
Surface Mounting on Vending Machine
(without Bill Acceptor Cutout)
If the vending machine doesn’t have a bill acceptor cutout:
1.
) supplied with kit and place it
over the mounting location.
2.
Drill four 0.2” holes and one 0.5” hole as shown in
3.
Insert pigtail (see
) from outside through
the 0.5” hole. Insert four 8mm long mounting screws supplied with
kit from inside and use them to secure the reader to the vending
machine door.
4.
Connect the MicroFit connector (see
) on
the reader pigtail to the MicroFit connector on the communication
cable.
5.
Verify functionality.
6.
Installation is complete.
