Oti 6500 TRIO Specification
Version 1.5
Installation
Confidential & Proprietary
page 19
6
Installation
6.1
Assembly in Bill Acceptor Cutout
The 6500 TRIO is designed to fit into the bill acceptor cutout.
If the vending machine has a bill acceptor cutout, please perform the
following steps:
1.
Take the mounting plate (see
) supplied with the kit and
attach it to the reader (see
) with four 8mm long
mounting screws.
2.
Open the vending machine door and remove the cutout cover. Hold
onto the cover mounting nuts; They will be used later (see Step
) to
secure the reader to the vending machine door.
3.
Insert the reader through the cutout from the inside, allowing the
bolts surrounding the cutout to pass through the cutouts in the
mounting plate.
4.
Use the cover mounting nuts (See Step
2) to secure the reader to the
vending machine door.
5.
Connect the MicroFit connector on the reader pigtail (see
) to the MicroFit connector on the communication
cable.
6.
Verify functionality.
7.
Installation is complete.
