VS 2001
Technical Handbook
Accessories
P/N: 779-0373/02
Revision 02
Marconi Proprietary information
Page 103
7.3
TROUBLESHOOTING FLOW DIAGRAMS
The troubleshooting flow diagrams are gathered in this chapter. These diagrams
are meant only for maintenance technical personnel.
By starting from a bad functioning symptom we arrive to the corrective operation to
be carried out in order to remove the failure; the corrective action can be a simple
maintenance operation (III level excluded) or it can end in sending the equipment
to the OTE assistance centre.
The troubleshooting flow diagrams relative to the radio terminal VS 2001 are
gathered in par. 7.3.1.
7.3.1
VS 2001: troubleshooting flow diagrams
A summary of the VS 2001 radio equipment troubleshooting is shown in Tab. 7.2.
In particular:
N:
stands for the procedure position in the prospectus;
Description:
stands for the symptom and thus the beginning of the fault seeking
procedure;
Fig. Ref.:
stands for the figure containing the flow chart relating to the
appropriate procedure.
Tab. 7.2:
Portable radio VS 2001 troubleshooting
N.
Description
Fig. Ref.
1
It‘s not possible to control the volume of the loudspeaker
7.9
2
The equipment doesn’t turn on
7.10
3
It’s not possible to exchange data with an external equipment
7.11
4
Failure in the selection of the standard operative functions and/or
in the selection of the digits from the keyboard
7.12
5
The green and/or red LED are not lit when they should
7.13
6
The FPG1/A display is out of order or it shows wrong symbols
7.14
7
The radio link, within the normal coverage area, is impossible,
intermittent or faint
7.15
