Function description
GB
58
CPTX 400-2/400-2w/450-2w Synergy
Additional settings:
1. By pressing t
he button “Set” (Pos.07) you can choose the gas pre flow.
With the potentiometer (Pos.10) you can set up your favorite value. This value is shown on
the left display. The unit [sec] is shown by the LED at the left display.
2.
By pressing the button „Set” (Pos.07) you can choose the “Softstart”.
With the potentiometer (Pos.10) you can set up your favorite value. This value is shown on
the left display. The unit [sec] is shown by the LED at the left display.
3.
By pressing the button „Set” (Pos.07) you can choose the burn-back time.
With the potentiometer (Pos.10) you can set up your favorite value. This value is shown on
the left display. The unit [sec] is shown by the LED at the left display.
4.
By pressing the button „Set” (Pos.07) you can choose the gas post flow.
With the potentiometer (Pos.10) you can set up your favorite value. This value is shown on
the left display. The unit [sec] is shown by the LED at the left display.
Four seconds after the last setting changes the device always returns to the standard
settings!
Other functions:
1. By pressing t
he button “gas test” (Pos.08) you can choose the appropriate gas-rate.
2. By pressing
the button „wire feed” (Pos.09) the welding wire will be inserted
through the feed mechanism and through the welding torch.
The welding device is ready for welding now!
