background image

WiJET.Video Technical Manual 

Page 6 of 29 

Chapter 3: 

USING WiJET.Video 

3.1  Using the WiJET.Video in a Meeting 

In addition to the obvious convenience with wireless connection, the most important 
benefit of eliminating the VGA cable in using presentation projectors or monitors is to 
enable fast handover of the projector or monitor control among multiple meeting 
participants. The Presentation Session Manager (PSM) provides a simple user 
interface allowing quick rotation of presentation among multiple presenters. The 
following simple steps sketch out how a successful Wireless Presentation Meeting 
unfolds: 

 

1.  Copies of the WiJET.Video installation CD are kept with the product in the 

meeting room. The meeting host, before the presentations start, identifies the 
meeting participants who do not yet have the Presentation Session Manger 
installed on their computers and hands them the installation CDs. The 
participants can either run PSM from the CDs or install the PSM onto their 
system. The installation is automatic and does not require rebooting the 
computer. 

2.  The meeting host asks all meeting participants to establish a wireless 

connection to the product before the meeting starts. Most participants can 
accomplish this by clicking just one button. This wireless connection is kept 
alive throughout the meeting even if only one presenter can use the projector or 
monitor at a given time. Confirming wireless connections before the meeting 
starts assures a smooth presentation session. 

3.  At any given time, by clicking just one button in the PSM, one designated 

presenter can start the presentation and exclude other presenters from using 
the projector/monitor. 

4.  At the click of one button in the PSM, the incumbent presenter yields the floor 

(the projector/monitor) to another presenter while still maintaining a live wireless 
link to the WiJET.Video. 

5.  At the click of one button in the PSM, a waiting presenter, owing to the already 

established wireless link, can instantaneously take over the projector/monitor. 

 

The normal meeting etiquettes have to be followed to determine how the control of the 
projector/monitor should be rotated among presenters. The WiJET.Video and its PSM 
make the rotation easy and quick and thereby make the meeting dynamic. 

 

Summary of Contents for WiJET.Video






























Reviews: