WiJET.Video Technical Manual
Page 7 of 29
3.2 Starting the WiJET.Video
When the product is first turned on, a boot up sequence will follow. After about 30
seconds, the unit will display the following graphic (Figure 3.1) with a few informative
messages.
Figure 3.1 WiJET.Video Banner Page
The messages will be displayed on the top of this image and consist of two lines. The
top line displays the SSID and the channel number of the unit while the second line
reports on the channels currently in use by other 802.11g equipment around the unit.
An example of the messages is given below:
SSID=WiJET.Video0001 Channel=6
RF activities detected on other channels (none).
There are several variations to the message on the second line. The variations and
what they mean are as follows:
RF activities detected on other channels (none).
No other 802.11g/b channels detected in use other than the WiJET.Video at all. Your
connection to the unit should be smooth and error free.
