WiJET.Video Technical Manual
Page 8 of 29
RF activities detected on other channels (8, 9).
Existing 802.11g/b channels detected in use, but there is no interference. Your
connection to the unit should be smooth and error free.
RF activities detected on other channels (1, 5, 8, 11). WARNING:
Interference.
Existing channels detected and interference found. The unit is in a RF noisy
environment, you may have trouble connecting and maintaining connections to the unit
even if a connection can be made.
Note:
WiJET.Video updates this information whenever the banner page appears.
In a noisy environment, channel information might get outdated quickly
since the product does not monitor channels continuously.
Once you have turned the WiJET.Video on and noted the above information, you can
now configure your computer to connect to the unit.
3.3 Configuring Computer to Control WiJET.Video
Before starting the Presentation Session Manager, the network interface of the
computer must have a valid IP address. For computers running DHCP client mode
while DHCP server is unavailable, it may take a few moments for the computers to
obtain a system IP address. If users cannot obtain a valid IP address for the network
interface, please refer to any network administration references for how to assign IP
address to a network interface/connection.
NOTE:
The computer’s network interface must have a valid IP address before PSM
starts.
3.4 Starting Presentation Session Manager
You have to start the Presentation Session Manager (PSM) to control the WiJET.Video
unit. There are two ways to run the PSM. One is to run the PSM directly from the utility
CD while the other is to run a locally installed PSM from a hard-drive.
To run the PSM directly from the utility CD, insert the utility CD into CD-Drive and click
the “Run from CD” button in an auto-start window. If the auto-run window does not
show up automatically, open My Computer and explore on the CD-Drive where the
utility CD is inserted and execute WiJET.Video.exe.
To run the locally installed PSM from a hard-drive, start PSM program located under
the Programs Folder in the Windows Start menu,
WiJET.Video Utility
as shown in
Figure 3.2. You can also double-click on the WiJET.Video shortcut on Windows
desktop to start PSM.
