E16
ERROR CODES
All About “E” Notification Codes and How to Resolve Them:
Your Rapid Multi-Cooker has been designed to help you achieve just the right results
for every meal. If the Rapid Multi-Cooker notices that something in the recipe or cooking
cycle needs to be optimized at any point, it will stop cooking and give you an “E”
Notification Code on the display screen. These “E” Notification Codes are very easy to
resolve, and ensure that your meal gets cooked to perfection.
Error
Solution
“CLOSE LID”
blinking light
Ensure that the Lid is closed completely and in the LOCKED position, aligning with
.
Display “E1”
The Multi-Cooker will stop the cooking cycle. Unplug Multi-Cooker and contact service
center.
Display “E2”
The Multi-Cooker will stop the cooking cycle. Unplug Multi-Cooker and contact service
center.
Display “E3”
The Multi-Cooker will stop the cooking cycle. Unplug Multi-Cooker, and allow to cool down
completely. Once Multi-Cooker has cooled down, check all parts of the Lid (See page
16). Turn Lid to LOCKED position. Ensure Steam Release Valve is in “Seal” (closed)
position. If this error code occurs again, unplug Multi-Cooker and contact service center.
Display “E4”
The Multi-Cooker will stop the cooking cycle. Unplug Multi-Cooker, and allow to cool down
completely. Once Multi-Cooker has cooled down, check Cooking Pot to ensure there is
enough liquid inside. Add more liquid if necessary (Minimum 250ml). Ensure no steam is
coming out of Cooking Pot before placing Lid back on Multi-Cooker. Turn Lid to LOCKED
position. Ensure Steam Release Valve is in “Seal” (closed) position. Select a pressure
cooking function, and then press START/STOP.
Display “E5”
The Multi-Cooker will stop the cooking cycle. Unplug Multi-Cooker and allow to cool. Once
it is cooled down, remove the Lid and check the Cooking Pot. Do not use the Lid when
using the BROWN/SAUTÉ function.
When using the SLOW COOK function, make sure that the Steam Release Valve is in the
“Release” (open) position before starting the cooking cycle.
Display “E6”
The Multi-Cooker will stop the cooking cycle. Unplug Multi-Cooker and allow to cool. Once
it is cooled down, remove the Lid and check the Cooking Pot. Add liquid as necessary.
Ensure a minimum of 250ml of liquid is used inside the removable Cooking Pot. If using a
pressure cooking function, ensure that the Steam Release Valve is in the “Seal” (closed)
position.
CKSTPCEC6801_19SEM1 (LA).indd 16
6/24/19 09:53
