E5
Getting started:
Remove all packaging, paper, and cardboard (including any located between the Cooking
Pot and Heating Base).
Read and save the literature and be sure to read the service and warranty information.
Assembly:
• Place Cooking Pot into the Heating Base
• Place Lid upon Multi-Cooker and align with . To lock, twist counterclockwise,
aligning with . To unlock, twist Lid clockwise and align with .
GETTING TO KNOW YOUR OSTER®
RAPID MULTI-COOKER
1. Remove the Lid by turning clockwise to unlock, aligning with . Remove the
Sealing Gasket from the Lid and wash the gasket and the Lid in warm soapy water.
Dry the Sealing Gasket and Lid thoroughly before reattaching the Sealing Gasket to
the Lid. Ensure the Sealing Gasket is smoothly and securely in place in the gasket
holder. If the Sealing Gasket is not in the correct position the Lid will not be able to
form a seal and will not be able to gain pressure.
2. Remove the Cooking Pot and the Condensation Collector and wash in warm, soapy
water. Dry thoroughly before replacing back in the Multi-Cooker.
The Oster
®
Rapid Multi-Cooker has been designed with safety in mind and has various
safety measures.
1. Pressure will not build if the Lid is not shut correctly and has not sealed.
2. Ensure Lid is in the completely locked position and the is aligned with .
3. Pressure will not build if the Steam Release Valve has not been switched to the Seal
“ ” position.
4. Over filling may cause a risk of clogging the vent pipe and developing excess
pressure.
5. The gasket and the valves can be removed for cleaning. (See page 14).
6. Once the pressure increases, the Lid cannot be opened. Safety sensors ensure the
pressure remains within the set range.
HOW TO USE YOUR OSTER® RAPID
MULTI-COOKER
Locked Lid
Unlocked Lid
Open Lid
Figure 1
CKSTPCEC6801_19SEM1 (LA).indd 5
6/24/19 09:53
