Ossur Mauch Knee Plus, Instructions For Use Manual

Page: 5 / 47

5
ENGLISH
Product no: Description:
MKN01660 SNS
MKN01661 SNS – LOW RESISTANCE
MKN01662 SWING ONLY
MKN01663 THRU HOLE – SNS
MKN01664 THRU HOLE SNS – LOW RESISTANCE
MKN01665 THRU HOLE – SWING ONLY
MKN01666 SNS – HIGH STANCE RESISTANCE
MKN01667 THRU HOLE SNS – HIGH STANCE RESISTANCE
APPLICATION
The Mauch ® Knee Plus is exclusively used for lower limb prosthetic
fittings.
TECHNICAL SPECIFICATIONS
• Maximum weight 166kg (366lbs)
• Net weight = 1210g (2.67lbs)
• 125° knee flexion available
FUNCTION & DESIGN
• Single-axis hydraulic knee system with swing control (S) or swing and
stance control (SNS).
• Designed for multispeed ambulation.
• Yielding stance control (with SNS package).
• Mode selector switch allows for manual locking and free swing
functions (with SNS package).
• The frame is constructed of aircraft-grade aluminum optimized for
strength.
• Universal 4-hole mounting patterns for versatile adapter options.
• Through hole configuration as optional.
• Side load spherical bearings at knee axis and high-tech bearings
ensure:
– Smoother motion
– Reduced play
– Increased durability
CAUTION
important: All components (adapters, screws and bolts), used with
Mauch Plus Knee must be rated to 166kg (366lbs). Failure to comply may
result in an injury and void the warranty.
Care should be taken with some component arrangements and / or
alignment. It can limit knee flexion and cause damage to the knee frame
or the cylinder, and may void the warranty as a result.
Össur recommends:
Össur Standard Adapters:
• Rated to 166kg (366lbs) High Impact
ALIGNMENT: (Figure B)
The alignment reference line is equal to the weight line.
• Establish a vertical pylon.
• Establish the knee center height.
• Establish the appropriate socket angles. 5 degrees of socket flexion is
recommended.
• Position the socket so that the alignment reference line bisects the
lateral wall at the ischial level of the socket and falls through or
slightly posterior to the knee axis.