Osstell ISQ Si-SQ, Instructions For Use Manual

Page: 13 / 40

13
7. Operation
> The TestPeg is for testing only and for teaching in the function.
> You can purchase SmartPegs from smartpegs.wh.com or osstell.com.
> SmartPegs are for single use only.
> SmartPegs are available for a range of different implant systems and can be used in combination
with all conventionally available implants.*
> Ensure that the sterile chain is not broken.
> Only use SmartPegs with intact packaging.

Select ISQ program.
The ISQ program always appears after the last program.

Pull a thread through the SmartPeg mount.
Tie the thread to your wrist to prevent loss.

Insert the SmartPeg into the SmartPeg mount.
The SmartPeg is magnetic and is held in place by SmartPeg mount. Check that it is retained secure hold.

Attach the SmartPeg to the implant or abutment by screwing the SmartPeg mount using finger force of
approximately 4-6 Ncm.
Do not overtighten the SmartPeg or the SmartPeg thread may be damage
* For further information, please contact an authorized W&H service partner or visit osstell.com