14
Operation
Press the foot control pedal once to start the measurement.
Press the foot control pedal again to stop the measurement early.
Hold the measuring probe about 3 to 5 mm from the tip of the SmartPeg until the
measured value is displayed.
Measure in both the mesiodistal direction (a) and the buccolingual direction (b).
Do not measure from above.
Repeat 5 and 6 to perform multiple measurements.
The measured value is underlined in colour and confirmed by a signal tone.
Remove the SmartPeg with the SmartPeg mount.
b
a
Summary of Contents for ISQ Si-SQ
