16
8.4 Program Operation
II.
WARNING: Should your sample fall inside of the UV Ozone Cleaner unit, do not
attempt to retrieve it. Doing so may result in damage to the unit or personal
injury. The UV Ozone Cleaner can operate safely should small objects fall into
the tray (providing the tray door can be fully closed).
3. Program the UV Ozone Cleaner with the desired
Set Time and press the start
button (see section below).
4. Once the program has finished, open the tray door and remove your sample.
WARNING! High voltage
The internal UV lamp can operate at a maximum of 4000 V. Make sure the unit is
connected to a grounded power outlet. Ensure the area around the back of the unit
is kept clear. It is good practice to keep any cables around the unit in a tidy manner.
Avoid keeping any solvents around this piece of equipment.
WARNING! Ultraviolet light
The low-pressure mercury vapour grid lamp inside this equipment emits harmful UV
radiation. Avoid exposure at all times. Avoid keeping any solvents around this piece
of equipment.
WARNING! Inhalation hazard
Ozone is produced by this equipment during operation. Use only inside a fume
cupboard and in an area where appropriate ventilation is available.
1. Turn the UV Ozone Cleaner power switch on (position ‘I’); the bootup screen is shown
Figure 8.4.
Figure 8.4. Bootup screen.
Summary of Contents for UV Ozone Cleaner
Page 22: ......
