www.traxontechnologies.com | www.osram.us/traxon
©2022 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U. PATENTS, JAPAN PATENTS, OTHER PATENTS
PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Installation Guide
01/22 V1.0
9 of 20
3. Installation
3.1 Points To Consider
Plan your installation before mounting any luminaires. The following should be considered for a successful
installation.
—
Weather conditions and ambient temperature of installation site.
—
Appropriate cable lengths
—
Adequate space for heat dissipation (150mm / 6” apart) of LED Engines (see “3.3 On-Site Installation” on page
12).
—
Appropriate anchor bolts where necessary to secure the ARCHISHAPE
®
2.0 Dot S/M/L.
—
The number of ARCHISHAPE
®
2.0 Dot S/M/L and LED Engines.
—
Controller to be used to control the ARCHISHAPE
®
2.0 Dot S/M/L.
3.2 Pre-Installation Checks
3.2.1
Installation Checklist
1. Prepare cables and all necessary accessories.
2. Perform functional check of ARCHISHAPE
®
2.0 Dot S/M/L.
3. Ensure the connector of last dot is covered by the End Cap Resistor.
4. Ensure all pre-installation checks laid out below have been followed.
5. Mount the ARCHISHAPE
®
2.0 Dot S/M/L on-site. If the installation is to be left uncompleted overnight, place
all non-connected LED Engines and ARCHISHAPE
®
2.0 Dot S/M/L in an indoor environment.
Ensure all the Connection Cables, ARCHISHAPE
®
2.0 Dot S/M/L are initially stored in a dry area to guarantee the
complete sealing of the system from water before installation.
Connector should be properly connected with cable connectors and the connector of last dot should be covered
by its Waterproof End Cap to ensure IP66 rating.
3.2.2
Handling The ARCHISHAPE
®
2.0 Dot S/M/L String
When transporting or preparing the ARCHISHAPE
®
2.0 Dot S/M/L string, please handle with care. To reduce
stress on cables, carry by the ARCHISHAPE
®
2.0 Dot S/M/Ls and not the cable during transit.
FIG.6: Correct way of handling ARCHISHAPE
®
2.0 Dot S/M/L String
Allow slack on cable to
reduce stress
